Wall Graphic Locations
Wall graphics are to be selectively implemented in a limited number of locations in the Sales, Lounge, and Service Reception areas. Wall graphics should not be installed in the Showroom.
1 along outer wall of Service Drive (unless this wall is glazed)
2 in Sales/Lounge area on any large continuous wall surface
3 in Vehicle Delivery on one large continuous wall surface
4 on lateral wall of Offices (optional to use monitor instead of graphic)
Do not locate graphics in:
See full Wall Graphics Specs
Wall Graphic Sizing
Wall graphics can be sized to accommodate a variety of spaces from small rooms, such as offices, to large wall expanses, such as in the Service Drive and Vehicle Delivery. This provides flexibility in wall graphic selection.
1 Full Wall Graphic. (vinyl)
2 Half-height Wall Graphic (fabric).
3a Framed Wall Graphic (fabric).
3b Wall-mounted Monitor (only at Offices).
Full Wall Graphic: Office
Full wall graphic pictured on the lateral wall across from the desk.
Half Height Wall Graphic: Office
When located along the same wall as the office furniture, half-height, full-width wall graphics are recommended.
Graphic Category: Heritage (Specifications > Wall Graphics > Heritage)
Wall graphic above technician toolboxes in the Service Workshop.
Wall Graphic Lighting
Lighting should be provided wherever graphics have been installed. The Audi lighting program has recessed accent lights — either wall washer fixtures or adjustable accent lights — that are available in either low volage halogen or LED equivalent.
Wall graphics are illuminated by TAW wall wash fixtures, as described in the Lighting Guidelines. The positioning of the TAW fixtures relative to the graphic is critical to achieve a balanced, scallop-free and hot spot-free illumination from the top of the wall to the bottom.
The spacing between wall wash fixtures and the surface to be illuminated should be set in a 1:1 ratio, per the diagram below. For example, if there is 36” between wall wash fixtures, then the row of fixtures should be set 36” from the wall. Please be aware that the TAW fixture has an asymmetric beam distribution and must be installed in the correct orientation to illuminate the wall(s).
In offices, if a monitor is to be provided in lieu of a graphic, no additional accent lighting is required.
1 The optimal distance between the wall and wall wash lights is 1/4 to 1/3 the height of the wall.
Audi of America. All rights reserved. © Copyright 2018