Specifications


Non-acoustical Perforated Metal Ceiling

Item #
C-5

Description
1’x4′ perforated metal ceiling system with no acoustical backing.  For use in Service Drives or other exterior covered areas.
Additional Info
  • 1.  Ceiling structure (incl. deck, ductwork, and pipes) above: Paint Matte Black
  • 2.  Ceilings must be properly vented to prevent moisture accumulation.
  • 3.  Ceiling to be coordinated with light fixtures, diffusers, and sprinkler systems. All sprinkler heads and devices to be recess (flush) mounted to ceiling surface and finished to match RAL 9006.

 

Inception Date
June 15, 2018

Approved Products

1×4 Panel – no backing (by Armstrong)

Product
MetalWorks Torsion Spring, no acoustical backing

Manufacturer
Armstrong
Dimensions
12 x 48 in.
Color
Silverlume
Finish
Audi perforation pattern BG 15820
Mounting Type
Torsion Spring
Lead Time
12 weeks
Notes

1. Linear Diffusers: Use Price Industries linear diffusers. See Accessory category, below.
2. Do not field-cut ceiling panels for diffuser coordination. Order corresponding 8in. or 6in. wide ceiling panels.

Supplier: Armstrong

Lisa Cavataio lycavataio@armstrongceilings.com
Mobile: 773.882.0299

1×4 Panel – no backing (by Gordon)

Product
Torsion Spring 12x48 Module, no acoustical backing

Manufacturer
Gordon
Dimensions
12 x 48 in.
Color
Submit sample for CDR review
Finish
Submit finish and perforation samples for CDR review
Mounting Type
Torsion Spring
Lead Time
Contact supplier
Notes

System and panel specifications must match the basis-of-design Hunter Douglas Luxalon Torsion Spring panel system or Armstrong Metalworks Torsion Spring system.

Supplier: Gordon

Bill Leon dsabay@aol.com
Phone: 631.912.9780
Fax: 631.912.9781

1×4 Panel – no backing (by Hunter Douglas)

Product
Luxalon Torsion Spring Perforated Metal Ceiling, no backer felt

Manufacturer
Hunter Douglas
Dimensions
12 x 48 in.
Color
RAL 9006 (HD 7163)
Finish
Slotted Perforation Pattern 625
Mounting Type
Torsion Spring
Lead Time
4-5 weeks
Notes

1. Provide heavy-duty springs for panel support in Service Drive, and provide analysis as necessary to confirm that negative pressure does not dislodge drive panels. Attachment system and substructure must be designed to meet local wind load requirements. For facilities in high wind zones, additional hold down clips are available.
2. Use Hook-On when negative design pressure exceeds 25 psf
3. Linear Diffusers: Use Titus ML-37 or ML-40 linear diffusers. See Accessory category, below.
4. Do not field-cut ceiling panels for diffuser coordination. Order Titus diffusers through Hunter Douglas to receive corresponding 8in. or 6in. ceiling panels.

Supplier: Hunter Douglas (Ceilings and Walls)

Rita Siewert (National Account Representative)
Rita.A.Siewert@saint-gobain.com
Phone: 770.542.1204
Mobile: 470.779.2150

5015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093

1×4 Panel – no backing (by Rockfon)

Product
Torsion Spring 12x48 Module, no acoustical backing

Manufacturer
Rockfon, LLC / Chicago Metallic
Dimensions
12 x 48 in.
Color
44-Satin Silver
Finish
Submit perforation samples for CDR review
Mounting Type
Torsion Spring
Lead Time
Contact supplier

Supplier: Rockfon, LLC / Chicago Metallic

Phil Curran phil.curran@rockfon.com
Mobile: 203.522.3173

Linear Diffuser (for use w/ Armstrong)

Product
SDS Linear Slot Diffuser, flanged at both ends (SDS diffuser - PXY63055 / SDB plenum box - PXY63427)

Manufacturer
Price Industries
Dimensions
4x48 2 slot, Model No. SDS50 / 6x48, 2 slot, Model No. SDS150
Finish
B25 custom color (match Armstrong Silverlume)
Lead Time
4 weeks standard, 2 or 3 weeks available for premium
Notes

1. Integrates with Armstrong Metalworks Torsion Spring system. See spec above.
2. Field cut ceiling tiles should not be used with linear diffusers. Use corresponding 8 in. or 6 in. wide Armstrong panel with diffusers.

Supplier: Price Industries

Joe Florer (Area Sales Manager)
joef@priceindustries.com
Phone: 469.984.1522

Linear Diffuser (for use with Hunter Douglas)

Product
ML-37 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-319375-01) / ML-40 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-XY30330-02)

Manufacturer
Titus
Dimensions
4x48, 6x48
Finish
RAL 9006 (HD 7163)
Lead Time
4-5 weeks
Notes

1. Use with Hunter Douglas 1×4 Panel ceiling. See specification above.
2. Order this linear diffuser through Hunter Douglas. When diffusers are ordered through HD, a corresponding 8in. or 6in. wide ceiling panel will ship to fit with the diffuser in the 12in. module.
3. Field cut ceiling tiles should not be used with linear diffusers

Supplier: Hunter Douglas (Ceilings and Walls)

Rita Siewert (National Account Representative)
Rita.A.Siewert@saint-gobain.com
Phone: 770.542.1204
Mobile: 470.779.2150

5015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093