Item #
TAB-1
1. The local design team must coordinate the fixture mounting accessories with ceiling type and construction and order accessories as required. Fixtures mounted in the torsion clip demountable ceilings require additional mounting clips.
2. The finish of all fixture trims and all visible, non-reflector parts must match the ceiling finish.
3. Fixtures without the option of an integral emergency battery pack should be connected to an inverter to provide emergency lighting where required.
CAT #
8121D-35C-9030-W-MW
Not available with integral battery backup. Connectto an inverter to provide emergency lighting where required.
Supplier: LF Illumination LLC
http://lfillumination.com/
CAT #
CSALP 60.3030.35.90.0. match ceiling
Contact manufacturer for housing and emergency options.
Supplier: Solavanti
Alex Karzalow (National Account Executive) alex@solavantilighting.com Phone: 214.416.9070 or Cell: 972.809.8230 http://www.solavantilighting.com/Solavanti Lighting
9659 Wendell Road
Dallas, TX 75243
CAT #
SGM6LEDXT30L30HKE * H12 / GM06XT30L30HKMD (sf) SO
Fixture only tilts up to 20°
Supplier: Spectrum Lighting
http://www.speclight.com/
CAT #
CARDANLEDR1-40w-930-WF-WH
Available with integral battery pack. Refer to cut sheet for increased housing size.
Supplier: Zumtobel
Shauna Deland (Zumtobel Project Manager, Client Services) shauna.deland@zumtobelgroup.com Phone: 845.691.7692Zumtobel Lighting, Inc.
3300 Route 9W
Highland, NY 12528
In addition to the manufacturers listed for each fixture type, the following distributors are approved to assemble complete or partial Audi-approved lighting packages for your project:
Commercial Lighting Industries (CLI)
Farren Halcovich
National Sales
81161 Indio Boulevard
Indio, CA 92201
P:800-755-0155 x 213
C:760-831-9815
farren@commercial-lighting.net
commercial-lighting.net
ILLUMINATION RESOURCES INC.
Deborah Witte, CID, MIES, ASID
President
112 E. Edwards
Ridgeway, IL 62979
C: 415.517.1303
dw@irilight.com
illuminationresources.com