Product
Luxalon Torsion Spring Perforated Metal Ceiling, no backer felt
1. Provide heavy-duty springs for panel support in Service Drive, and provide analysis as necessary to confirm that negative pressure does not dislodge drive panels. Attachment system and substructure must be designed to meet local wind load requirements. For facilities in high wind zones, additional hold down clips are available.
2. Use Hook-On when negative design pressure exceeds 25 psf
3. Linear Diffusers: Use Titus ML-37 or ML-40 linear diffusers. See Accessory category, below.
4. Do not field-cut ceiling panels for diffuser coordination. Order Titus diffusers through Hunter Douglas to receive corresponding 8in. or 6in. ceiling panels.
Supplier: Hunter Douglas (Ceilings and Walls)
Rita Siewert (National Account Representative) Rita.A.Siewert@saint-gobain.com Phone: 770.542.1204 Mobile: 470.779.21505015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093
Product
Luxalon Torsion Spring Perforated Metal Ceiling with acoustical backing
1. Use standard border and curved 1 inch wide trim, provided where ceiling meets gypsum board to conceal edge.
2. Linear Diffusers: Use Titus ML-37 or ML-40 linear diffusers. See Accessory category, below.
3. Do not field-cut ceiling panels for diffuser coordination. Order Titus diffusers through Hunter Douglas to receive corresponding 8in. or 6in. ceiling panels.
Supplier: Hunter Douglas (Ceilings and Walls)
Rita Siewert (National Account Representative) Rita.A.Siewert@saint-gobain.com Phone: 770.542.1204 Mobile: 470.779.21505015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093
Product
ML-37 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-319375-01) / ML-40 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-XY30330-02)
1. Use with Hunter Douglas 1×4 Panel ceiling. See specification above.
2. Order this linear diffuser through Hunter Douglas. When diffusers are ordered through HD, a corresponding 8in. or 6in. wide ceiling panel will ship to fit with the diffuser in the 12in. module.
3. Field cut ceiling tiles should not be used with linear diffusers.
Supplier: Hunter Douglas (Ceilings and Walls)
Rita Siewert (National Account Representative) Rita.A.Siewert@saint-gobain.com Phone: 770.542.1204 Mobile: 470.779.21505015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093
Product
ML-37 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-319375-01) / ML-40 Linear Diffuser with 2-Slot, Border 2A (Model No. HD-XY30330-02)
1. Use with Hunter Douglas 1×4 Panel ceiling. See specification above.
2. Order this linear diffuser through Hunter Douglas. When diffusers are ordered through HD, a corresponding 8in. or 6in. wide ceiling panel will ship to fit with the diffuser in the 12in. module.
3. Field cut ceiling tiles should not be used with linear diffusers
Supplier: Hunter Douglas (Ceilings and Walls)
Rita Siewert (National Account Representative) Rita.A.Siewert@saint-gobain.com Phone: 770.542.1204 Mobile: 470.779.21505015 Oakbrook Parkway
Suite 100
Norcorss, GA 30093